Solenoid Valve with Manual Reset Working Principle

Manual Reset Solenoid Valves are used in applications and processes demanding utmost safety checks before starting / stopping the process. In all such application, human intervention is the final check before the process is taken into/ taken off the auto mode. Based on the nature of the process, the solenoid valves are required to stop the process from starting automatically in case of an emergency or vice versa. These valves are called Manual Reset valves with Latching on Energization. They are also referred to as No voltage Release or Free handle type Manual reset. 

Solenoid Valve with Manual Reset

Manual Reset Solenoid valves Types & Operation

1. Manual Reset, (Latching on energization) valve is to be used for application which demands utmost safety check before starting of the process. Valve cannot be operated electrically. The valve switches ON when electrical supply to the solenoid is available followed by manual operation. In absence of power to the solenoid, the valve can be operated manually. Valve is switched OFF when power to the solenoid is removed. Some of the examples where Manual reset ON valve should be used, are starting of Fuel gas flow, switching on solenoid valve for starting main process, etc. 

Also See: Solenoid Valve Working Animation

2. Manual Reset, (Latching on De-energization) In certain application, the valves are energized on automatically, however they are required to remain energized till manually turned off. These valves are called Manual Reset with Latching on De-energization of the Solenoid. They are also referred to as Trip shut off type Manual Reset Valves. Solenoid Valves used in Fire Fighting systems are typical example of application of this type.

Also Read: 5 Port 2 Position Valve Working Principle

3. Manual Reset Tamper Proof Where in the valve cannot be operated till either by pressing manual reset button or by providing electrical supply. The valve changes position only when the electrical supply is provided and button pressed momentarily. On de energizing the solenoid, the valve trips. This feature is currently available in 3 port valve only

The necessity of having a manual reset in solenoid valve should be determined during design phase, this shall be identified by process engineer or by operator through HAZOP. The philosophy is based on whether the operator is required to be present on site or not. He/she should check the surrounding condition and make sure everything on site is normal (e.g. no hydrocarbon spill) before resetting the valve.

Also Read : Instrumentation related Formulas